The Optical Reading Head or Optical Probe

An optical reading head or Optical Probe is an interface. It is intended for two-way data exchange between a counter such as a electric meter, electricity meter, gas meter, heat meter, water meter, etc. and a peripheral device via infrared optical waves.

All our heads read or Optical probes work with optical infrared waves with the individual meter and are compliant to the standard IEC 62056-21 (formerly IEC 1107)  or ANSI C12.18. Our products differ mainly on the signal output to the peripheral device.

Your preferred selection method and your reading device set significantly the right product and the output signal (RS-232, RS-485, TTL, USB or Bluetooth).

OP-735
Bluetooth Optical Probe OP-735

Bluetooth Optical Probe
Industry: all
Radio: Bluetooth BLE V4.1

OP-740
Bluetooth Optical Probe OP-740

Bluetooth Optical Probe
Included: Android Library
Radio: Bluetooth Ver 3.0

OP-730
Bluetooth Optical Probe OP-730

Bluetooth Optical Probe
Industry: all
Radio: Bluetooth Ver 3.0

OP-210
Optical probe for smart metering OP-210

Optical Probe
Standard: IEC 62056-21
Connector: USB-A

OP-204
Optical Probe OP-204

Optical Probe
Standard: IEC 62056-21
Connector: with USB-C

OP-205
Optical probe OP-205 with Micro-USB Connector

Optical Probe
Standard: IEC 62056-21
Connector: with Micro-USB

OP-301
Optical probe OP-301 with RS-232 output signal

Optical Probe
Output signal: RS-232
Connector: DB9F

OP-300
Optical probe OP-300 with RS-232 output signal

Optical Probe
Output signal: RS-232
Connector: D-Sub 9 Pol – female

OP-305
Optical probe OP-305 with RS-232 output signal

Optical Probe
Output signal: RS-232
Connector: D-Sub 9 Pol – male

OP-330
Optical probe OP-330 with RS-232 output signal

Optical Probe
Output signal: RS-232
Connector: DIN 5 Pin male

OP-333
Optical probe OP-333 with RS-232 output signal

Optical Probe
Output signal: RS-232
Connector: Without Connector

OP-340
Optical probe OP-340 with RS-232 output signal

Optical Probe
Output signal: RS-232
Connector: RJ-45

OP-345
Optical probe OP-345 with RS-232 output signal

Optical Probe
Output signal: RS-232
Connector: RJ-10

OP-400
Optical probe OP-400 with RS-485 output signal

Optical Probe
Output signal: RS-485
Connector: Without Connector

OP-410
Optical probe OP-410 with RS-485 output signal

Optical Probe
Output signal: RS-485
Connector: RJ-10

OP-500
Optical probe OP-500 with TTL voltage level (0 to 3.3 V)

Optical Probe
Output signal: TTL voltage level
Connector: Without Connector

AP-210
ANSI Optical Head AP-210 with USB output signal

ANSI Optical Head
Standard: ANSI C12.18
Connector: USB-A

AP-300
ANSI Optical Head AP-300 with RS-232 output signal

ANSI Optical Head
Output signal: RS-232
Connector: DB9F

AP-333
ANSI Optical Head AP-333 with RS-232 output signal

ANSI Optical Port
Output signal: RS-232
Connector: Without Connector

PC-100
Portable Scanning Head PC-100

Portable Scanning Head
Signal level: TTL
Connector: Without Connector